|
|
|
Technical Specifications
To
estimate the quantity of SPARTITE needed, measure the square inch, or
square centimeter, area of the mast section and subtract that number from
the square inch, or square centimeter, area of the partner opening. Multiply
this number by the desired depth, which must be at least 2" (5 cm),
then add 1/4" (7 mm). If you purchase too little, a further amount
can always be mixed and added later.
| 
|
Collar
Cross
Section Area
(A) |
Mast
Cross
Section Area
(B) |
Depth
of Pour +.25"
(II) |
|
| |
| Spartite
2000 comes in two kit sizes:
| Kit
I = 51 cu. in. = 836 cu. cm |
| Kit II =
102 cu. in.= 1672 cu.
cm |
|
 |
"Making
the floor of the mold"
|
| Technical Specifications |
Spartite 2000 |
| Mix Ratio by weight
or volume |
100/25 |
| Mixed viscosity @ 25°C,
cps |
2,500 |
| Pot Life @ 25°C |
8-14 min |
| Cure @ 25°C (days before
sailing) |
3 days |
| Color |
Midnight Blue |
| Shore Hardness |
55-60 D |
| Tensile Technical Specifications, psi |
4,000 |
| Ultimate Elongation,
% |
200 |
| Tear Strength (Graves),
pli |
600 |
| Compressive Modulus, psi |
55,000 |
| Linear Shrinkage, in./in. |
.001 |
| Izod Impact, notched, ft. lbs./in. |
9.5 |
|
|
| |
|
